Pogo pins Straight-Through Type
Product Name:Pogo pins Straight-Through Type
Product model:SMF/P-300
Delivery time: 20 days
Type: non-standard
- Overview
- Parameter
- Inquiry
- Related Products
1、Product features:
1)100% environmentally friendly materials that meet RoHs and REACH requirements.
2)Automatic riveting press assembly, automatic inspection and shipment.
3)Tolerances can be controlled to ±0.01mm.
4)Contact impedance ≤ 15m Ω.
5)The life span can reach more than 1000000 times.
6)No mold opening, convenient customization, cost saving.
7)The elasticity can be adjusted according to the requirements.
8)Small spacing and space saving
2、Product parameters:
this is a pogo pin with a straight through structure, which can be applied to small drones, smart eye masks, laptops, beauty devices, etc; | |
ITEM | DATA #1 |
Model | SMF/P-300 |
Metallic materials | Brass C3604 |
PIN electroplating | Au 0.125um~0.75um |
Work schedule | 1.0mm |
Elastic force | 50g±10g |
Contact resistance of spring pin | 50mOhm Max. |
Rated voltage | 12V |
Rated current | 2A |
Mechanical life | 100,000 cycle Min |
Salt spray test | 48H-96H |
Packing | PE bag / reel packing |
Material and coating conform to ROHS and REACH standards |
3、Pogo pin connector scheme can be customized according to your requirements.
1. Shape structure: SMT,DIP, bend, double pin, welding wire structure, integrated type.
2. Material: C3604 C6801.
3. Elasticity: ≤ 15g.
4. Rated voltage / current: ≤ 120V, ≤ 40A.
5. Connection method: 90 °, 180 °or other angle.
6. Mother end assembly style; DIP, 90 °bending, welding wire, glue wrap molding, etc.
7. Mother end positioning mode: concave and convex groove, sealing ring, clamping lock, positioning ear, positioning column, in-mold injection molding.
Let us be your most reliable supplier!
4、Introduction to Pogo pin Connector
POGO PIN is a spring-loaded probe made by riveting the three components of the needle shaft, spring and needle tube through precision equipment, also known as pogo pin, spring thimble, POGOPIN connector. The bottom of the needle of POGO PIN is usually a beveled structure, and the function of the beveled structure is to ensure that the POGO PIN keeps the needle in contact with the inner wall of the needle tube when working, so that the current mainly passes through the gold-plated needle and needle tube to ensure the stability and low impedance of POGO PIN;
*In the design, the compression amount is generally 2 inch 3 of the total stroke;too little pressure and insufficient forward force will lead to impedance instability;too much pressure will damage the pipe mouth and lead to poor card PIN.
*In the process of assembly, we should also pay attention to keep the pipe mouthaway from the force, so as not to hit the pipe mouth and cause PIN card.
*Battery contacts paired with POGOPIN or FPC gold fingers should not have dirt, oxidation, etc.
5、The use of different structures of Pogo pin