male spring loaded pogo pin connector fast connector pogopin

2、Product parameters：

3、Pogo pin connector scheme can be customized according to your requirements.

1. Shape structure: SMT,DIP, bend, double pin, welding wire structure, integrated type.

2. Material: C3604 C6801.

3. Elasticity: ≤ 15g.

4. Rated voltage / current: ≤ 120V, ≤ 40A.

5. Connection method: 90 °, 180 °or other angle.

6. Mother end assembly style; DIP, 90 °bending, welding wire, glue wrap molding, etc.

7. Mother end positioning mode: concave and convex groove, sealing ring, clamping lock, positioning ear, positioning column, in-mold injection molding.

Let us be your most reliable supplier!

4、Introduction to Pogo pin Connector

POGO PIN is a spring-loaded probe made by riveting the three components of the needle shaft, spring and needle tube through precision equipment, also known as pogo pin, spring thimble, POGOPIN connector. The bottom of the needle of POGO PIN is usually a beveled structure, and  the function of the beveled structure is to ensure that the POGO PIN keeps the needle in contact with the inner wall of the needle tube when working, so that the current mainly passes through the gold-plated needle and needle tube to ensure the stability and low impedance of POGO PIN;

*In the design, the compression amount is generally 2 inch 3 of the total stroke;too little pressure and insufficient forward force will lead to impedance instability;too much pressure will damage the pipe mouth and lead to poor card PIN.

*In the process of assembly, we should also pay attention to keep the pipe mouthaway from the force, so as not to hit the pipe mouth and cause PIN card.

*Battery contacts paired with POGOPIN or FPC gold fingers should not have dirt, oxidation, etc.

5、Product application display

The plate-mounted low-current spring needle is mainly used in precision electronic equipment. This type of spring needle is designed to be directly mounted on the PCB board and is suitable for situations where the current is relatively small but requires high-precision and high-stability connection. 

Consumer electronic products. 
(1) in small electronic devices such as smartphones and tablet computers, it is used for micro-current signal transmission between internal circuit boards, such as the connection between touch screen controllers, sensors, microphones, speakers and other components and the motherboard. 
(2) in smart wearable devices (such as smartwatches, smart bracelets), they are used as small, space-saving connectors for contact connections of battery contacts, wireless charging modules, and other weak signal transmission. 

Medical equipment. 
In medical electronic equipment, small current spring needle can be used to connect low power circuits, such as heart rate monitor, blood glucose meter, sphygmomanometer and other portable devices in the weak signal acquisition and processing circuit. 

Internet of things Devic. 
In the sensor nodes and embedded systems of the Internet of things, the small current spring needle, as the key connector of small signal and data transmission, realizes the reliable interconnection with the main control chip or other sensor components. 

Communication equipment. 
In the communication module and base station equipment, the small current spring needle can be used for the test point connection of RF radio frequency signal or the connection of small signal conditioning circuit. 

Automotive electronics. 
In the small signal processing part of vehicle electronic equipment, such as GPS module, vehicle entertainment information system and so on, the small current spring needle can provide a stable and earthquake-resistant connection scheme.

6、Company introduction

Xinteng is a pogopin magnetic connector solution source factory, mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, 12 R & D personnel, customized development products have 100 + items, obtained a national patent certificate of 40 million; at present, there are a variety of magnetic products to choose from, can also provide technical services for your product design and development, to relieve your worries.

7、Product category

Xinteng Electronics belongs to a pogopin magnetic connector solution source factory, from design-R & D-production, one-stop service; mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, R & D staff of 12 people, customized development products have 600 + items, obtained national patent certificate 80 +. At present, there are a variety of magnetic products to choose from, and it can also provide technical services for your product design and development to relieve your worries.

Hope to further communicate the details, to facilitate the rapid provision of products, thank you!