1-100pin Pogo Pin Connectors,Spring Pogo Pin Connectors,XINTENG

3pin pogo pin connector 1A current pogo connector-1002

1、Product features:

1)100% environmentally friendly materials that meet RoHs and REACH requirements.

2)Automatic riveting press assembly, automatic inspection and shipment.

3)Tolerances can be controlled to ±0.01mm.

4)Contact impedance ≤ 15m Ω.

5)The life span can reach more than 1000000 times.

6)No mold opening, convenient customization, cost saving.

7)The elasticity can be adjusted according to the requirements.

8)Small spacing and space saving

2、Product parameters：

This is a 3pin connector male and female seat, female head can reach waterproof IP67, can be used in: handheld devices, smart home appliances, detectors, intelligent robots and so on.
ITEM	DATA #1
Model	pogo pin connector 1002
Metallic materials	Brass C6801
PIN electroplating	Plating 5u"Au over 60～100u" Ni.
Work schedule	1.0mm
Elastic force	80g±20g
Housing	HTN
Contact resistance of spring pin	50mOhm Max.
Rated voltage	12V
Rated current	1A
Mechanical life	5000,0 cycle Min
Salt spray test	48H-96H
Packing	PE bag / reel packing
Material and coating conform to ROHS and REACH standards

3、Pogo pin connector scheme can be customized according to your requirements.

1. Shape structure: SMT,DIP, bend, double pin, welding wire structure, integrated type.

2. Material: C3604 C6801.

3. Elasticity: ≤ 15g.

4. Rated voltage / current: ≤ 120V, ≤ 40A.

5. Connection method: 90 °, 180 °or other angle.

6. Mother end assembly style; DIP, 90 °bending, welding wire, glue wrap molding, etc.

7. Mother end positioning mode: concave and convex groove, sealing ring, clamping lock, positioning ear, positioning column, in-mold injection molding.

Let us be your most reliable supplier!

4、Introduction to Pogo pin Connector

POGO PIN is a spring-loaded probe made by riveting the three components of the needle shaft, spring and needle tube through precision equipment, also known as pogo pin, spring thimble, POGOPIN connector. The bottom of the needle of POGO PIN is usually a beveled structure, and the function of the beveled structure is to ensure that the POGO PIN keeps the needle in contact with the inner wall of the needle tube when working, so that the current mainly passes through the gold-plated needle and needle tube to ensure the stability and low impedance of POGO PIN;

pogopin (1)

*In the design, the compression amount is generally 2 inch 3 of the total stroke;too little pressure and insufficient forward force will lead to impedance instability;too much pressure will damage the pipe mouth and lead to poor card PIN.

*In the process of assembly, we should also pay attention to keep the pipe mouthaway from the force, so as not to hit the pipe mouth and cause PIN card.

*Battery contacts paired with POGOPIN or FPC gold fingers should not have dirt, oxidation, etc.

5、Product application display

1.Automobile high voltage system: the high voltage circuit connection between new energy vehicles and other vehicles to ensure the safety and efficiency of power transmission.

2.Industrial control and automation: M12 connector 2pin is often used for sensor, actuator signal transmission or power connection in industrial environment. Because of its good tightness and stable locking mechanism, M12 connector is suitable for stable work in harsh environment.

3.BMS: in some battery management system applications, 2Pin-2*20Pin-bit connectors may be used to achieve specific signal or power connections to ensure battery pack management and protection functions.

4.Consumer electronics and home appliances: 2pin connectors can be used for basic power or signal connections, such as circuit board connections within small appliances.

5.General circuit board connection: 2pin chip socket is often used for simple power supply or signal line connection on the circuit board to facilitate the assembly and maintenance of the PCB board.

6.Communication equipment: although direct reference to 2pin connectors is rarely used in communication devices, connectors such as RJ45 are used for data transmission in communication networks, while 2pin connectors may be used for auxiliary circuits or low-speed signal transmission.

6、Company introduction

Xinteng is a pogopin magnetic connector solution source factory, mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, 12 R & D personnel, customized development products have 100 + items, obtained a national patent certificate of 40 million; at present, there are a variety of magnetic products to choose from, can also provide technical services for your product design and development, to relieve your worries.

7、Product category

Xinteng Electronics belongs to a pogopin magnetic connector solution source factory, from design-R & D-production, one-stop service; mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, R & D staff of 12 people, customized development products have 600 + items, obtained national patent certificate 80 +. At present, there are a variety of magnetic products to choose from, and it can also provide technical services for your product design and development to relieve your worries.