3A current 7Pin Pogo pin connectors spring pin connector Father and mother

2、Product parameters：

3、Pogo pin connector scheme can be customized according to your requirements.

1. Shape structure: SMT,DIP, bend, double pin, welding wire structure, integrated type.

2. Material: C3604 C6801.

3. Elasticity: ≤ 15g.

4. Rated voltage / current: ≤ 120V, ≤ 40A.

5. Connection method: 90 °, 180 °or other angle.

6. Mother end assembly style; DIP, 90 °bending, welding wire, glue wrap molding, etc.

7. Mother end positioning mode: concave and convex groove, sealing ring, clamping lock, positioning ear, positioning column, in-mold injection molding.

Let us be your most reliable supplier!

4、Introduction to Pogo pin Connector

POGO PIN is a spring-loaded probe made by riveting the three components of the needle shaft, spring and needle tube through precision equipment, also known as pogo pin, spring thimble, POGOPIN connector. The bottom of the needle of POGO PIN is usually a beveled structure, and  the function of the beveled structure is to ensure that the POGO PIN keeps the needle in contact with the inner wall of the needle tube when working, so that the current mainly passes through the gold-plated needle and needle tube to ensure the stability and low impedance of POGO PIN;

*In the design, the compression amount is generally 2 inch 3 of the total stroke;too little pressure and insufficient forward force will lead to impedance instability;too much pressure will damage the pipe mouth and lead to poor card PIN.

*In the process of assembly, we should also pay attention to keep the pipe mouthaway from the force, so as not to hit the pipe mouth and cause PIN card.

*Battery contacts paired with POGOPIN or FPC gold fingers should not have dirt, oxidation, etc.

5、Product application display

High-end audio equipment: provide sufficient power for headphone drivers or built-in amplifiers while requiring high-definition audio transmission. 
The 7 pins can be used for audio signal, ground wire, microphone signal, power supply and control signal of left and right channel, respectively. 3A current is sufficient to drive high quality audio components. 

VR/AR headsets: these devices typically transmit high-definition video and audio signals and power processors, displays, and other components within the device. 
The 7-pin design can meet the transmission needs of complex signals, while the 3A current can support the power requirements of higher-performance hardware. 

Professional photography and camera equipment: for accessories such as external monitors, external recording equipment or LED supplementary lights, which need to transmit video, audio, control signals and provide adequate power supply at the same time, the 7-pin 3A connector ensures efficient and stable data and power transmission. 

Industrial control system: in the industrial automation environment that needs to control multi-channel sensor input, actuator output and power supply, the 7-pin 3A Pogopin connector can simplify wiring, improve system reliability and maintenance convenience.

Interface between electric vehicle charging gun and vehicle: although Pogopin is not usually directly used for vehicle high-voltage charging, in some auxiliary systems such as battery management system data communication and low-voltage control circuits, the 7-pin design can integrate control signals with low-power power supply, and 3A current is suitable for such applications.

The connection between the UAV power module and the control module: the connection between the internal modules of the UAV may need to transmit motor control signals, battery status information, GPS signals and so on at the same time, while supplying power to the control module, the 7-pin 3A connector can provide the necessary interface. 

Modular components in medical devices: in medical devices that require flexible configuration and upgrade, such as patient monitoring systems or portable diagnostic devices, 7-pin 3A connectors can support fast docking of multiple signals and power supplies.

6、Company introduction

Xinteng is a pogopin magnetic connector solution source factory, mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, 12 R & D personnel, customized development products have 100 + items, obtained a national patent certificate of 40 million; at present, there are a variety of magnetic products to choose from, can also provide technical services for your product design and development, to relieve your worries.

7、Product category

Xinteng Electronics belongs to a pogopin magnetic connector solution source factory, from design-R & D-production, one-stop service; mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, R & D staff of 12 people, customized development products have 600 + items, obtained national patent certificate 80 +. At present, there are a variety of magnetic products to choose from, and it can also provide technical services for your product design and development to relieve your worries.

Hope to further communicate the details, to facilitate the rapid provision of products, thank you!

6、Company introduction

Xinteng is a pogopin magnetic connector solution source factory, mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, 12 R & D personnel, customized development products have 100 + items, obtained a national patent certificate of 40 million; at present, there are a variety of magnetic products to choose from, can also provide technical services for your product design and development, to relieve your worries.

7、Product category

Xinteng Electronics belongs to a pogopin magnetic connector solution source factory, from design-R & D-production, one-stop service; mainly produces pogopin, spring pin connectors, magnetic connectors, magnetic charging lines and other precision hardware; factory area of 2700 square meters, R & D staff of 12 people, customized development products have 600 + items, obtained national patent certificate 80 +. At present, there are a variety of magnetic products to choose from, and it can also provide technical services for your product design and development to relieve your worries.

Hope to further communicate the details, to facilitate the rapid provision of products, thank you!